Skip to content

Destek

Gas spring BL3-10/28-31.5-192.5-1200N-VP18-S (Destek)

Блокируемые с эластичной блокировкой
Крепление штока
Крепление цилиндра

Specifications

Technical specifications of the gas spring
mounts A20 E101
Rod Ø 10 mm
Cylinder Ø 28 mm
Rod stroke 32 mm
Length 210 mm
Force 1200 N

Delivery across Russia. Selected region: Saint Petersburg

VST replacement

Russian VST gas springs — equivalent to BL3-10/28-31.5-192.5-1200N-VP18-S by parameters and mounts. Saint Petersburg stock, delivery across Russia.

Full equivalent Match 100%

Parameter guide

What are mounts? Rod and cylinder end fittings

Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.

Common options:

  • Ball socket — quick to install and allows free rotation.
  • Threaded stud — versatile with brackets or adapters.
  • Clevis — reliable pin or bolt mounting for higher loads.
  • Rod end bearing — compensates misalignment and reduces rod stress.
  • Eyelets and special ends — for non-standard applications.

Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.

On this gas spring (BL3-10/28-31.5-192.5-1200N-VP18-S) rod mount is A20 (type not specified) cylinder mount is E101 (type not specified).

Rod mount A20
Mount rod — A20
Cylinder mount E101
Mount cylinder — E101
What is rod Ø? Rod diameter

Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.

Before ordering gas spring Destek BL3-10/28-31.5-192.5-1200N-VP18-S or VST VSTLE-1023-80-340-500N (R13E102) with delivery to Saint Petersburg, confirm rod Ø 10 mm fits your application.

What is cylinder Ø? Cylinder diameter

Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.

Cylinder Ø 28 mm on Destek BL3-10/28-31.5-192.5-1200N-VP18-S defines body size. Compare with Stabilus 0004MN — same cylinder Ø for parameter-based selection.

What is rod stroke? Working stroke

Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.

Rod stroke 32 mm on gas spring Destek BL3-10/28-31.5-192.5-1200N-VP18-S sets how far a lid or hatch opens. In Блокируемые с эластичной блокировкой with the same stroke: Stabilus 007636.

What is length? Extended length

Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.

Overall length 210 mm on Destek BL3-10/28-31.5-192.5-1200N-VP18-S is a key installation dimension. Gas spring VST 002464 has the same length — compare mounts, rod Ø and force before replacement.

What is force? Force in newtons

Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.

Force 1200 N on gas spring Destek BL3-10/28-31.5-192.5-1200N-VP18-S must match your load. Stabilus 005378 has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.

Where to buy gas spring BL3-10/28-31.5-192.5-1200N-VP18-S with delivery to Saint Petersburg? Order and delivery

Order gas spring BL3-10/28-31.5-192.5-1200N-VP18-S on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.

Similar springs

Matched by rod Ø, cylinder Ø, stroke, length, force and mounts. The percentage shows how closely parameters match this item.

Блокируемые с эластичной блокировкой

Elastic-lock springs allow slight compliance while holding position — more comfort in seats and backs. BL3-10/28-31.5-192.5-1200N-VP18-S: rod diameter 10 mm, cylinder diameter 28 mm, rod stroke 32 mm, extended length 210 mm, force 1200 N. End fittings: A20, E101. In stock at TPK Vesta warehouse in Saint Petersburg, delivery across Russia.