|
mounts | E19 E20 |
|---|---|---|
|
Rod Ø | 12 mm |
|
Cylinder Ø | 23 mm |
|
Rod stroke | 300 mm |
|
Length | 719 mm |
|
Force | 1300 N |
Delivery across Russia. Selected region: Saint Petersburg
Russian VST gas springs — equivalent to E2E2B42-300-719-003-1300N by parameters and mounts. Saint Petersburg stock, delivery across Russia.
mounts
E19 E20
rod Ø
12 мм
cylinder Ø
23 мм
stroke
300 мм
length
719 мм
force (N)
1300 N
Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.
Common options:
Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.
On this gas spring (E2E2B42-300-719-003-1300N) rod mount is E19 (type not specified) cylinder mount is E20 (type not specified).
Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.
Before ordering gas spring Bansbach E2E2B42-300-719-003-1300N or VST VSTS-1223-300-719-1300N (E19E20) with delivery to Saint Petersburg, confirm rod Ø 12 mm fits your application.
Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.
Cylinder Ø 23 mm on Bansbach E2E2B42-300-719-003-1300N defines body size. Compare with VST VSTLE-1023-80-340-500N (R13E102) — same cylinder Ø for parameter-based selection.
Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.
Rod stroke 300 mm on gas spring Bansbach E2E2B42-300-719-003-1300N sets how far a lid or hatch opens. In Стандартные with the same stroke: Stabilus 0038YI.
Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.
Overall length 719 mm on Bansbach E2E2B42-300-719-003-1300N is a key installation dimension. Gas spring VST VSTS-1223-300-719-1300N (E19E20) has the same length — compare mounts, rod Ø and force before replacement.
Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.
Force 1300 N on gas spring Bansbach E2E2B42-300-719-003-1300N must match your load. Stabilus 007945 has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.
Order gas spring E2E2B42-300-719-003-1300N on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.
Matched by rod Ø, cylinder Ø, stroke, length, force and mounts. The percentage shows how closely parameters match this item.
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Differs: Rod stroke, Length, Force
Standard gas springs are the most common gas struts for lids, hatches, hoods and panels. E2E2B42-300-719-003-1300N: rod diameter 12 mm, cylinder diameter 23 mm, rod stroke 300 mm, extended length 719 mm, force 1300 N. End fittings: E19, E20. In stock at TPK Vesta warehouse in Saint Petersburg, delivery across Russia.
